CAM Graphics, Co. Inc.166 New HighwayAmityville, NY 11701(631) 842-3400
PC interface: RS232
Specification
Power requirement: +5VDC (100mA Max., typical 70mA, 50mV peak to peak max. ripple)
Operating Temp.: 0 to 50
Storage Temp.: -40 to 80
Relative Humidity: 95% at 60
Protocol: 9600 baud, None parity, 8 bits date, 1 stop bit
Report Rate: Max. 160 points/sec
Response time: Max. 35 ms
Pin out definition: X+, Y+, COM, X-, Y-
Panel Resistance: 300 ~ 900 ohm (pin to pin on the same layer)
Board Dimensions
Home | About Us | Products | Capabilities | Advanced Testing | Resources
CAM Graphics, Co. Inc. © 2006 Web design by The Complete Website